Manual Hydraulic Gate Adjustment - Cylinder Symbol; Programming Mode - Lock Symbol - Bosch CS 550 Operator's Manual

All manuals and user guides at all-guides.com
To adjust volume, the "Vol Adj" needs to be checked on setup user screen.
4.5 Manual Hydraulic Gate Adjustment
For hydraulic gate operation ONLY.
Press the ' ' ' ' Cylinder Cylinder Cylinder' ' ' ' Cylinder symbol to select the gate adjustment mode. Use the up and
down arrows to adjust.
4.6 Programming Mode
Press the 'Lock' 'Lock' 'Lock' 'Lock' symbol to enter into programming mode. (Note: A valid
'PROGRAMMING KEY' must be inserted into the USB port.)
Press the
symbol again to end the
gate adjustment.
See Calibration Manual for
programming details.
Bosch Rexroth Canada ı 07.22.2013 ı Revision 2.0
10/18
' ' ' ' Cylinder Cylinder' ' ' ' Cylinder Cylinder