Bosch CS 550 Operator's Manual page 14

All manuals and user guides at all-guides.com
9 Liquid + Mode
This screen is only available when the LIQUID+ mode is selected in the programming
mode. (See Calibration Manual for details.)
Boom Selection Boom Selection
Boom Selection Boom Selection
Press the red dial buttons to select the desired Boom. Pause and Blast operate the
same as a Granular Spreader.
Rate Selection Rate Selection Rate Selection Rate Selection
Use the upper right arrows to select the desired liquid flow rate.
Solid and Pre- - - - wet Solid and Pre Solid and Pre Solid and Pre wet wet wet
All standard spreader functions perform as defined earlier in the manual
10 Cross Conveyor Mode
Use the controls on the top right of the screen to control the Cross Conveyors.
Select left or right with the circular buttons. Use the up and down arrows to adjust
the speed.
Bosch Rexroth Canada ı 07.22.2013 ı Revision 2.0
14/18