Quick Start Guide
5.2
Verifying configuration with LOI
The optional LOI can be used for commissioning the device. The LOI is a two-
button design with internal and external buttons. The internal buttons are
located on the display of the transmitter, while the external buttons are
located underneath the top metal tag. To activate the LOI, push any button.
LOI button functionality is shown on the bottom corners of the display. See
Table 5-3
Figure 5-3: Internal and External LOI Buttons
A. Internal buttons
B. External buttons
Note
See
Figure 12 on page 15
Table 5-3: LOI Button Operation
Button
Left
Right
18
and
Figure 5-4
for button operation and menu information.
to confirm external button functionality.
No
Yes
SCROLL
ENTER
Emerson.com/Rosemount
March 2022