Hitachi RCD-0.8FSN3 Installation And Operation Manual page 9

GENERAL INFORMATION
1 GENERAL INFORMATION
1.1 GENERAL NOTES
or transmitted in any shape or form without the permission of
HITACHI Air Conditioning Products Europe, S.A.U.
Within the policy of continuous improvement of its products,
HITACHI Air Conditioning Products Europe, S.A.U. reserves
and without being compelled to introducing them into products
subsequently sold. This document may therefore have been
subject to amendments during the life of the product.
1.2 PRODUCT GUIDE
1.2.1 Prior check
N O T E
Check, depending on the name of the model, the type of air conditioning
Check, in accordance with the Installation and Operating
Manuals included with the outdoor and indoor units, that all the
information necessary for the correct installation of the system
is included. If this is not the case, please contact your distributor.
2 SAFETY
2.1 SYMBOLS USED
During normal air conditioning system design work or unit
installation, greater attention must be paid in certain situations
requiring particular care in order to avoid injuries and damage to
the unit, the installation or the building or property.
Situations that jeopardise the safety of those in the surrounding
area or that put the unit itself at risk will be clearly indicated in
this manual.
To indicate these situations, a series of special symbols will be
used to clearly identify these situations.
Pay close attention to these symbols and to the messages
following them, as your safety and that of others depends on it.
D A N G E R
• The text following this symbol contains information and
instructions relating directly to your safety and physical
wellbeing.
• Not taking these instructions into account could lead to serious,
very serious or even fatal injuries to you and others in the
proximities of the unit.
information on safe procedures during unit installation.
1 PMML0416A rev.0 - 12/2015 - P5415720
PART I- OPERATION
HITACHI makes every effort to offer correct, up-to-date
documentation. Despite this, printing errors cannot be controlled
by HITACHI and are not its responsibility.
As a result, some of the images or data used to illustrate this
accepted based on the data, illustrations and descriptions
included in this manual.
prior, written authorisation from the manufacturer.
1.2.2
Unit type (indoor unit): RCD
Capacity (HP): (0.8-6.0)
XXX – XX
C A U T I O N
•
•
•
information on safe procedures during unit installation.
N O T E
•
•
FS: SYSTEM FREE
N: R410A refrigerant
3: Series
FS N 3