Hitachi RCD-0.8FSN3 Installation And Operation Manual page 43

INSTALLATION OF OPTIONAL AIR PANEL P-AP(90/160)DNA
8
the air panel to the mounting seat of the unit by using long
the gap between the panel and the ceiling in order to prevent
air leakage may cause deformation of the inner face of the
panel, but it is not abnormal.
Inside the air outlet
9 Tighten the long screws until touching the stopper to the
leakage and to be no gap between the false ceiling surface
and the indoor unit, the inner circumference of the air panel
deformed. However, it is not abnormality.
False ceiling
N O T E
10 Firmly tighten the long screws. If the long screws are
Air leakage
Smudge
Dewing
35 PMML0416A rev.0 - 12/2015 - P5415720
Enlarged view
Bottom side of
indoor unit
Long screw for air panel
Bottom side of air panel
+5
0
11
12 The indoor unit height is adjustable from the corner hole if
the levelness of the indoor unit, the drain piping, etc. are not
affected by the adjustment.
Wrench
N O T E
C A U T I O N
13 Attachment of Corner Pocket Cover
Attach the corner pocket covers (4 portions) after the air
panel is mounted completely.
a. Catch the band at the rear side of the corner pocket
cover onto the projection at the air panel as shown in the
b.
Projection
Strap
N O T E
B to the air panel
C to the air panel.