Hitachi RCD-0.8FSN3 Installation And Operation Manual page 11

BEFORE OPERATION
4 BEFORE OPERATION
C A U T I O N
•
•
4.1 EFFICIENT USE OF INDOOR UNIT
• Do not leave a window or a door open
dew condensation of the indoor unit. Also ventilate a room
• Hang a curtain or a blind on a window
increased.
• Do not use heating appliances during cooling operation
as much as possible
dew condensation and dew drop.
4.2 EFFICIENT USE OF COOLING AND HEATING
1
35°
Air outlet angle (above center) Air Outlet Angle (Above Center)
2 Air Flow Volume: "AUTO" should be usually used.
3 Temperature: The recommended set temperature is 27 to
N O T E
•
•
3 PMML0416A rev.0 - 12/2015 - P5415720
COOLING
35°
Louver Louver
Angle
angle
•
•
• Use a circulator if warm air stays around the ceiling
The comfort will be increased. Contact your distributor for
details.
•
surface gets dirty
• Turn OFF the main power supply if the indoor unit is not
used for a long time
If not, the standby electricity charges will have to be paid
even if the indoor unit is unused.
HEATING
1
60°
Air outlet angle (above center) Air Outlet Angle (Above Center)
2 Air Flow Volume: "AUTO" should be usually used.
3 Temperature: The recommended set temperature is 18 to
60°
Louver Louver
Angle
angle