Cli Overview; Comparison Of Configuration Interfaces - Juniper J4350 Getting Started Manual

J4350 and J6350 Services Router Getting Started Guide
Router. For example, to display a summary of routing table entries, click
Monitor in the task bar, then click Routing>Route Information in the side
pane. The routes are displayed in the main pane.
For more information about the J-Web interface, see "Using the
J-Web Interface" on page 52.

CLI Overview

The CLI is a straightforward command interface in which you type commands
on a line and press Enter to execute them. The CLI provides command help,
command completion, and Emacs-style keyboard sequences for moving around on
the command line and scrolling through a buffer of recently executed commands.
The CLI has two modes:
For more information about the CLI, see "Using the Command-Line
Interface" on page 58.

Comparison of Configuration Interfaces

Table 25 describes and compares the interfaces you can use to
configure a Services Router.
50
User Interface Overview
Operational mode—Complete set of commands to control the CLI
environment, monitor and troubleshoot network connectivity, manage the
Services Router, and enter configuration mode.
Configuration mode—Complete set of commands to configure the Services
Router. This guide refers to configuration mode as the CLI configuration editor.
For more information, see "Comparison of Configuration Interfaces" on
page 50.