J4350 Services Router Overview; J6350 Services Router Overview - Juniper J4350 Getting Started Manual

J4350 and J6350 Services Router Getting Started Guide

J4350 Services Router Overview

The J4350 Services Router is designed primarily for regional or branch offices.
It has a chassis that is 2 U (rack units) in size with a nonredundant AC or DC
power supply, and a Universal Serial Bus (USB) port for external storage.
J4350 routers ordered with the optional Crypto Accelerator card come standard
with 1 GB of memory, while those ordered without the Crypto Accelerator
card come standard with 256 MB of memory. J4350 routers can contain
between 256 MB and 2 GB of memory. For instructions on adding memory,
see "Removing and Installing DRAM Modules" on page 155.
Each J4350 chassis contains four built-in Gigabit Ethernet ports with link
speeds of 10/100/1000 Mbps over a copper interface, and six slots for
field-replaceable Physical Interface Modules (PIMs). Two of the six slots
(slots 3 and 6) support high-speed interfaces (ePIMs).
The J4350 Services Router supports the following field-replaceable
Physical Interface Modules (PIMs):

J6350 Services Router Overview

The J6350 Services Router is designed primarily for regional or central
offices. It has a chassis that is 2 U (rack units) in size with an optional
redundant AC or DC power supply, up to 2 GB of memory, and two Universal
4
J6350 Services Router Overview
SFP Gigabit Ethernet ePIM (1 port)
Copper Gigabit Ethernet ePIM (1 port)
ADSL 2/2+ Annex A PIM (1 port)
ADSL 2/2+ Annex B PIM (1 port)
Dual-Port E1 PIM
E3 PIM (1 port)
DS3 (T3) PIM (1 port)
Dual-Port Fast Ethernet PIM
4–port Fast Ethernet ePIM
G.SHDSL PIM (2 ports)
4-port ISDN BRI S/T or U PIM
Dual-Port Serial PIM
Dual-Port T1 PIM