Services Router User Interface Overview; User Interface Overview; J-Web Overview - Juniper J4350 Getting Started Manual

Chapter 4

Services Router User Interface Overview

User Interface Overview

J-Web Overview

You can use two user interfaces to monitor, configure, troubleshoot, and manage a
Services Router—the J-Web interface and the JUNOS command-line interface (CLI).
This chapter contains the following topics:
User Interface Overview on page 49
Before You Begin on page 52
Using the J-Web Interface on page 52
Using the Command-Line Interface on page 58
This section contains the following topics:
J-Web Overview on page 49
CLI Overview on page 50
Comparison of Configuration Interfaces on page 50
The J-Web graphical user interface (GUI) allows you to monitor, configure,
troubleshoot, and manage the Services Router by means of a Web browser with
Hypertext Transfer Protocol (HTTP) or HTTP over Secure Sockets Layer (HTTPS)
enabled. The J-Web interface provides access to all the configuration statements
supported by the router, so you can fully configure it without using the CLI.
The J-Web interface provides two methods of Services Router configuration:
Quick Configuration
Configuration editor
For more information, see "Comparison of Configuration Interfaces" on page 50.
In addition to configuration, you can use the J-Web interface to perform
many monitoring, troubleshooting, and management tasks on the Services
User Interface Overview
49