Outdoor Unit Installation - Trane MCXE Series Owner's Manual & Installation Manual

Outdoor Unit Installation

Unit Installation
1. Should be mounted on a concrete platform. At least 100 mm.
height and mounted on a concrete plateform with bolts.
The base should strong enough to support weight and
2.
vibration.
3. In case of installing the machine on the roof make sure the
roof can support the weight. Use a mounting-pad on the
legs of the machine to prevent vibration transmitted to the
building.
4. The installation location must not contain any objects obstruct
the air inlet-outlet of the unit. And around condensing units
must enough spaces for airflow.
5. The installation location is not close to the area where there
is a dense combustible gas.
6. The installation location is seperate. Enough distance to
sound and heat will not affect users and neighbors.
7. The installation location that can be easily checked or repaired.
NOTE:
Install the unit by following local codes and regulations, there
may be differ slightly between different regions.
14
Dimensional Data
Model Unit Dimension
12k 805×554×330
18k 890×673×342
24k-30k 946×810×410
36k-60k 952×1,333×415
Rows of series installation
½
Mounting Dimension
Distance A Distance B
514
663
673
634
A
L
25 cm
½H
30 cm
Can not be installed
MCXE-IOM
340
354
403
404