Declaration Of Conformity; Guarantee And Support; Software And Firmware Updates; Device Compatibility - Philips NX0960 User Manual

Hide thumbs Also See for NX0960:

Table of Contents

Declaration of Conformity

Hereby, DAP B.V. declares that the Air Cooker NX096x is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following

internet address: https://www.philips.com.

The Air Cooker NX096x is equipped with a WiFi module, 2.4GHz 802.11 b/g/n

with a maximum output power of 92,9mW EIRP.

If you need information or support, please visit www.philips.com/support, scan

the QR code provided on the pack or in the introduction booklet or read the

separate worldwide guarantee leaflet.

Updating is essential to safeguard your privacy and the proper functioning of

your Air Cooker and the app.

Please always update the app to the latest version.

The Air Cooker is updating the appliance firmware automatically.

Note

• To enable the Air Cooker to update to the latest firmware version, make sure

your Air Cooker is connected to your home WiFi.

• Always use the latest app and firmware.

• Updates are made available when there are software improvements.

• A firmware update is started automatically when the Air Cooker is in stand-

by mode. This update takes a few minutes. During this time the Air Cooker

cannot be used.

For detailed information about the compatibility of the app, please refer to the

information in the app Store.

For a factory reset of the Air Cooker, select the factory reset function in the Tools

→ Settings menu.

Your Air Cooker is then no more connected to your home WiFi and not paired

with your smart device anymore.

English

Table of Contents