2.4 Installation of Air Duct
NOTES!
① There should be insulating layer on air-out duct, air-return duct and fresh air duct to
avoid heat loss and moisture. Adhere a nail on the air duct and then add thermal
sponge with a layer of tin. Fasten it with a nail cover and then seal the junction with
tin tapes. You can also use other materials that have good insulation quality.
② Each air-out duct and air-return duct should be fixed on a pre-made board with iron
frame. The junction of air duct should be well-sealed in order to prevent air leakage.
③ The design and construction of air duct should comply with national requirements.
④ The edge of air-return duct is suggested to be more than 150mm(5-7/8 inch.) away
from the wall. Add a filter to the air-return opening.
⑤ Please consider noise-damping and vibration damping for the design and
construction of air duct. Besides, noise source must be away from people. For
instance, do not have the air-return opening installed on top of the user (Offices, rest
area, etc.).
2.4.1 Installation of Air-out Duct
(1) Installation of the Rectangular Duct.
No.
1
2
3
4
2.4.2 Shape and Size of Air Outlet and Air-Return Opening
Fig.10
Name
Hanger Rod
Return Air Duct
Canvas Duct
Return Air Inlet
Fig.11 Air Outlet
Ducted Type Split Air-Conditioner Units(Inverter Series)
No.
5
6
7
-
6
Name
Static Pressure Box
Main Supply Air Duct
Supply Air Outlet
-
Unit:mm