Intellinet UNC-W10 User Manual page 42

WIRELESS NETWORK IP CAMERA User's Guide
Wireless Network IP Camera is to be connected under Infrastructure mode. Your PC/ Notebook's
encryption code also needs to be setup the same with the Wireless Internet Camera's encryption
code under either Infrastructure mode or Ad-hoc mode.
The default setting for the Encryption Key is "Disable" therefore, to secure the wireless
transmission be sure to Enable the Encryption Key by entering the relevant data.
Carefully input Encryption Code, any error setting will cause communication link to fail
Infrastructure Mode
An 802.11 networking framework in which devices communicate with each other by first going
through an Access Point (AP). In infrastructure mode, wireless devices can communicate with
each other or can communicate with a wired network. When one AP is connected to wired network
NOTE
IMPORTANT
:
41