Intellinet UNC-W10 User Manual page 33

WIRELESS NETWORK IP CAMERA User's Guide
Administration Menu's Overview
The table below provides a one-step overview of the Administrations Tools:
Image Configuration
Network Configuration
Wireless Configuration
User Configuration
Event Trigger Configuration
Time Configuration
System Configuration
Home
To prevent any unauthorized use of Wireless Network IP Camera access is strictly restricted to
defined users only. Administrator(s) has exclusive access to the product Administration Tools and
can determine the registration, and access rights for all users.
Enter the default ID and Password, then click "SUMIT"
(Default ID and Password are all "admin")
Although, the Administrator's default username and password (set to "admin" for all)
can be used for logging in to the unit for the first time, it is highly recommended that you change
the this password for your Wireless Network IP Camera as soon as possible – since all Wireless
Network IP Camera products are shipped with the same ID and Password as default.
Make sure to click "submit" after verifying configuration, and then you can get the right
Configuration as you want, otherwise it won't be changed at all.
To configure compression rate, image size, brightness, contrast, etc.
To configure camera IP, web server port, image transfer port
To configure wireless setting
To configure user ID & Password
To configure event trigger condition, image capture option, trigger
To configure date and time
To configure the camera name, location, PTZ and see the system
Move to Wireless Network IP Camera homepage
CAUTION
NOTE
32
output
information.