Table of Contents
Advertisement
WIRELESS NETWORK IP CAMERA User's Guide
Top view and Description
Network Activity LED
Image Capture LED
Operating status LED
Image Capture LED (Red): The Image Capture LED flashes when users are accessing the camera,
it flashes once when an image is being captured or saved.
Operating Status LED (Green): This LED indicates the Wireless Network IP Camera's operating
status. Once power is supplied, it is on for the first 15-20 seconds and then it blinks once every
second as long as the power is connected properly.
Network Activity LED (Green): This LED indicates network activity.
NOTE
1. After connecting the Ethernet network, the status led (Green) on the very right side on
camera should be turn on. If not, check your network connection.
2. The slide switch on the rear panel is positioned to LAN/WAN or WLAN setting for the
wireless communication to take effect.
10
Advertisement
Table of Contents
Need help?
Do you have a question about the UNC-W10 and is the answer not in the manual?