Table of Contents
Advertisement
Standard features
Simple everyday use
3. TV
3.1. Freeview Play
Connects to the Freeview Play platform where you can
access available catch-up TV services (only appears when
the TV is connected to the internet).
3.2. Guide
You can access the electronic programme guide menu
using this option. Refer to Electronic Programme Guide
section for more information.
3.3. Channels
You can access the Channels menu using this option.
Refer to Using the Channel List section for more
information.
3.4. Timers
You can set timers for future events using the options of
this menu. You can also review the previously created
timers under this menu.
To add a new timer select the Add Timer tab using the
Left/Right buttons and press OK. Set the sub-menu
options as desired and when finished press OK. A new
timer will be created.
To edit a previously created timer, highlight that timer,
select the Edit Selected Timer tab and press OK. Change
the sub-menu options as desired and press OK to save
your settings.
To cancel an already set timer, highlight that timer, select
Delete Selected Timer tab and press OK. A confirmation
message will be displayed. Highlight Yes and press OK to
proceed. The timer will be cancelled.
It is not possible to set timers for two or more events that
will broadcasted in different channels at the same time
interval. In this case you will be asked to choose one
of these timers and cancel others. Highlight the timer
you want to cancel and press OK, Options menu will
be displayed. Then highlight Set/Cancel and press OK
to cancel that timer. You will have to save changes after
that. In order to do that press OK, highlight Save Changes
and press OK again.
3.5. More Apps
In order to manage the apps installed on your TV, you
can use this option. Highlight and press OK. You can
add an installed app to Home menu, launch or remove
it. Highlight an app and press OK to see the available
options.
3.6. Market
You can add new apps from the application market using
this option. Highlight and press OK. Available apps will be
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
displayed. You can also access the application market
from within the More Apps menu.
3.7. Reset Apps
You can reset your customisations on the Home menu
to defaults using this option (availability depends on
TV model and its features). Highlight and press OK. A
confirmation message will be displayed. Highlight Yes and
press OK to proceed. Note that you will not be able to
perform this operation again within the next few minutes.
3.8. Accessibility
You can access the accessibility settings menu directly
using this option.
3.9. Privacy Settings
You can access the privacy settings menu directly using
this option. This option may not be available depending
on the model of your TV and the selected country during
the first time installation process.
4. Settings
You can manage the settings of your TV using the options
of this menu. Refer to Settings Menu Content section
for more information.
5. Sources
You can manage your input source preferences using
the options of this menu. To change the current source
or use your TV as a wireless display device highlight one
of the options and press OK.
5.1. Source Settings
You can access the source settings menu directly using
this option. Edit the names, enable or disable selected
source options.
Standby Notifications
If the TV does not receive any input signal (e.g. from an
aerial or HDMI source)
for 3
When you next switch-on, the following message will be
"TV switched to standby mode automatically
displayed:
because there was no signal for a long time."
The Auto Power Down option (in the Settings>System
>More menu) could have been set to a value between 1
and 8 hours by default. If this setting is not set as Off and
the TV has been left on and not been operated during
the set time, it will switch into standby mode after the
set time has expired.
When you next switch-on
the following message will be
to standby mode automatically because no operation
was made for a long time." Before the TV switches into
standby mode a dialogue window will be displayed. If
you do not press any button the TV will switch into the
Standard features
minutes, it will go into standby.
the
displayed: "TV switched
TV,
19
Advertisement
Table of Contents
