Table of Contents
Advertisement
Standard features
Simple everyday use
How to Watch a DVD
When placing a disc into the loader, labelled side of the
disc should be on the front.
When TV set is turned on, first switch to DVD source by
using the Source button on the remote control. Press play
on the remote control, or directly press play button on
the side panel. If there is no disc inside the loader, place
a DVD first and press play.
Note: If you switch to another source by pressing Source
or Programme +/- buttons on the remote control, DVD
playback will be paused automatically. You should press
Play button and resume the playback manually when
you switch to DVD mode.
DVD Control Panel Buttons
/
(Play / Pause)
Plays/pauses the disc. When DVD menu (root menu) is
active, this button functions as "button select" (selects
the highlighted item in menu) if this is not prohibited by
the disc.
(Stop / Eject)
/
Stop playing disc / Eject or Load the disc.
Note:
You cannot eject the disc via the remote control.
While playing a file, you should press STOP button three
times to eject.
General Playback
Basic Play
1. Press the Standby button.
2. Please insert a disc into the loader.
The disc will be automatically loaded and play will
commence if the disc does not have any menus recorded
on it.
A menu may appear on the TV screen after a few moments
or the film may start immediately. This behaviour depends
on the disc content and may differ.
Note: Step 3 and 4 are available only when a menu is
recorded on the disc.
3. Press Down / Up / Left / Right or the numeric button
(s) to select the preferred title.
4. Press OK to confirm the selected item.
The played item may be a motion picture, a still picture
or another submenu depending on the disc content.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
For your reference:
If an action corresponding to a button is prohibited the
"
" symbol appears.
Notes on Playback:
1. No sound will be heard during fast forward or rewind.
2. No sound will be heard during slow motion play.
3. Reverse slow motion play may not be available
depending on the DVD content.
4. In some cases, the subtitle language is not changed
immediately to the selected one.
5. When the preferred language is not selected even after
pressing the button several times, it means that the
language is not available on the disc.
6. When the player is restarted or the disc is changed,
the subtitle selection is automatically changed back
to the initial settings.
7. If a language is selected, not supported by the disc,
the subtitle language will automatically be set to the
disc's priority language.
8. Usually a circulation will happen while switching to
another subtitle, that is you can cancel the subtitle
by pressing the Text button a number of times until
"Subtitles Off" appears on the screen.
9. When the power is turned on or the disc is removed,
the language heard is the one selected at the initial
settings. If this language is not recorded on the disc,
only the available language on the disc will be heard.
10. Some DVDs may not contain root and/or title menus.
11. Reverse stepping is not available.
12. For your convenience:
If you attempt to enter a number greater than the
total time of the current title, the time search box
disappears and "
Input Invalid" message appears
on upper-left corner of screen.
13. Slide Show is disabled when the ZOOM mode is on.
Standard features
21
Advertisement
Table of Contents
