Tv Control Buttons & Operation; Standby Notifications; Using The Channel List - Bush DLED49287HDCNTDFVP Instruction Manual

Standard features
Simple everyday use
TV Control Buttons & Operation
Up direction
1.
Down direction
2.
Volume / Info / Sources List selection and Standby-
3.
On switch
The Control button allows you to control the Volume /
Programme / Source and Standby-On functions of the TV.
To change volume: Increase the volume by pushing the
button up. Decrease the volume by pushing the button
down.
To change channel: Press the middle of the button,
the information banner will appear on the screen. Scroll
through the stored channels by pushing the button up
or down.
To change source: Press the middle of the button
twice(for the second time in total), the source list will
appear on the screen. Scroll through the available sources
by pushing the button up or down.
To turn the TV off: Press the middle of the button down
and hold it down for a few seconds, the TV will turn into
standby mode.
Notes:
• If you turn the TV off, this circle starts again beginning
with the volume setting.
• Main menu OSD cannot be displayed via control button.
Operation with the Remote Control
Press the Menu button on your remote control to display
main menu screen. Use the directional buttons to select
a menu tab and press OK to enter. Use the directional
buttons again to select or set an item. Press Return/Back
or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source button on your remote control consecutively to
select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume by
using the Volume +/- and Programme +/- buttons on
the remote.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
18 Standard features

Standby Notifications

If the TV does not receive any input signal (e.g. from
an aerial or HDMI source) for 5 minutes, it will go into
standby. When you next switch-on, the following
message will be displayed: "TV switched to stand-by
mode automatically because there was no signal for
a long time." Press OK to continue.
If the TV is on and it isn't being operated for a while it will
go into standby. When you next switch-on, the following
message will be displayed. "TV switched to stand-by
mode automatically because no operation was made
for a long time." Press OK to continue.

Using the Channel List

The TV sorts all stored stations in the Channel List. You
can edit this channel list, set favourites or set active
stations to be listed by using the Channel List options.
Press the OK/TV button to open the Channel List. You
can filter the listed channels by pressing the Blue button
or open the Edit Channel List menu by pressing the
Green button in order to make advanced changes in
the current list.
Managing the Favourite Lists
You can create four different lists of your favourite
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List is
displayed on the screen in order to open the Edit Channel
List menu. Select the desired channel on the list. You can
make multiple choices by pressing the Yellow button.
Then press the OK button to open the Channel Edit
Options menu and select Add/Remove Favourites
option. Press the OK button again. Set the desired list
option to On. The selected channel/s will be added to
the list. In order to remove a channel or channels from
a favourite list follow the same steps and set the desired
list option to Off.
You can use the Filter function in the Edit Channel
List menu to filter the channels in the Channel list
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite lists
to be displayed everytime the Channel list is opened.
The filtering function in the Channel list menu will only
filter the currently displayed Channel list in order to find
a channel and tune in to it. These changes will not remain
the next time the Channel list is opened if you don't
save them. To save the changes on the list press the Red
button after filtering while the Channel list is displayed
on the screen.