Standby Notifications; Using The Channel List - Bush DLED32FHDS Instruction Manual

Standard features
Simple everyday use
5. Sources
You can manage your input source preferences using
the options of this menu. To change the current source
or use your TV as a wireless display device highlight one
of the options and press OK.
5.1. Source Settings
You can access the source settings menu directly using
this option. Edit the names, enable or disable selected
source options.

Standby Notifications

If the TV does not receive any input signal (e.g. from an
aerial or HDMI source)
When you next switch-on, the following message will be
"TV switched to standby mode automatically
displayed:
because there was no signal for a long time."
The Auto Power Down option (in the Settings>System
>More menu) could have been set to a value between 1
and 8 hours by default. If this setting is not set as Off and
the TV has been left on and not been operated during
the set time, it will switch into standby mode after the
set time has expired.
the following message will be
to standby mode automatically because no operation
was made for a long time." Before the TV switches into
standby mode a dialogue window will be displayed. If
you do not press any button the TV will switch into the
standby mode after a waiting period of about 5 minutes.
You can highlight Yes and press OK to switch the TV into
standby mode immediately. If you highlight No and press
OK, the TV will remain on. You can also choose to cancel
the Auto Power Down function from this dialogue.
Highlight Disable and press OK, the TV will remain on
and the function will be cancelled. You can enable this
function again by changing the setting of the Auto Power
Down option from the Settings>System>More menu.

Using the Channel List

The TV sorts all stored stations in the channel list. You can
edit this channel list, set favourites or set active stations
to be listed by using the Channels menu options. Press
the OK button to open the channel list. You can filter the
listed channels or make advanced changes in the current
list using the Filter and Edit tab options. Highlight the tab
you want and press OK to see available options.
In order to add the channel you are currently watching
to the Home menu, highlight the Add to Home option in
the Edit tab in the Channels menu and press OK.
Managing the Favourite Lists
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
20 Standard features
for 3 minutes, it will go into standby.
When you next switch-on
displayed: "TV switched
You can create four different lists of your favourite
channels. Enter the TV>Channels menu or press the OK
button in order to open the Channels menu. Highlight
the Edit tab and press OK to see the editing options
and select the Tag/Untag channel option. Select the
desired channel on the list by pressing the OK button
while the channel is highlighted. You can make multiple
choices. You can also use the Tag/Untag all option to
select all channels on the list. Then press Back/Return
button to return to the Edit menu options. Select Add/
Remove Favourites option and press the OK button
again. Favourite channel list options will be displayed.
Set the desired list option to On. The selected channel/s
will be added to the list. In order to remove a channel or
channels from a favourite list follow the same steps and
set the desired list option to Off.
You can use the filtering function in the Channels menu
to filter the channels in the channel list permanently
according to your preferences. For instance, using the
options of the Filter tab, you can set one of your four
favourite lists to be displayed every time the channel list
is opened. The selected filtering options will be shown
the TV,
on the top of the Channels menu screen.