Table of Contents
Advertisement
Advanced features
Getting the most from your TV
Sound Menu Content
Dolby Audio
DTS Virtual:X
Sound Output
AVL (Automatic Volume
Limiting)
Advanced Settings
Equalizer
Dynamic Bass
DTS DRC
Sound Mode
Digital Out
Headphone
Balance
Reset
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
30
Advanced features
Smart, Movie, Music, News and Off options will be available. Set as Off to disable.
Note: Some items in Sound menu will be grayed out and unavailable if set to an option other than
Off. Settings of some other options may also change depending on the current settings.
This feature will enhance your sound experience by providing a virtualisation of surround
speakers through your TV's speakers. You can select one of the predefined sound modes.
Music, Sports, Cinema and Off options will be available. Set as Off to disable.
Note:
Sound
Some items in
Off
than
. Settings of some other options may also change depending on the current settings.
Sets the sound output preference. TV, S/PDIF, HDMI ARC, Headphone Only and Lineout
options will be available. There will be no sound output except through the selected
option and the headphone jack.
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this option
as Headphone Only. Please ensure before using headphones that this menu item is set
to Headphone Only. If it is set to Lineout, the output from the headphone socket will
be set to maximum which could damage your hearing.
If HDMI ARC option is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in
and will be unavailable.
Sets the sound to obtain fixed output level between programmes.
If the Dolby Audio menu item is set to an option other than Off the AVL setting options
will change. Auto, Night, Normal and Off options will be available. In Auto mode the
TV will switch to Normal or Night mode automatically according to the current time
information. If no time information is available this option will always function as Normal.
When the TV switches to Night mode for the first time after setting this option as Auto,
an information bar will pop up on the screen.
Please note that compared to Normal mode Night mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Selects the equalizer mode. Custom settings can be made only when in User mode.
Enables or disables the Dynamic Bass.
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. Enable or disable the DTS DRC by
setting as On or Off.
You can select a sound mode (If the viewed channel supports).
Sets digital out audio type.
Sets headphone volume. This option will not be available if the Sound Output option
is set as Lineout.
Please ensure before using headphones that the headphone volume is set to a low level,
to prevent damage to your hearing.
Sets sound balance. This feature will be activated if Sound Output option is set as TV
or Headphone Only. Balance item adjusts the balance level of the TV speakers and
headphone together.
Resets some of the sound settings to factory defaults.
menu will be grayed out and unavailable if set to an option other
Sound
menu will appear as grayed out
Advertisement
Table of Contents
