Table of Contents
Advertisement
Standard features
Simple everyday use
1. Home
When main menu is opened Home menu bar will be
highlighted. The content of the Home menu can be
customised by adding options from other menus. Just
highlight an option and press the Down direction button
on the remote. If you see Add to Home option you can
add it to the Home menu. Same way you can delete or
change the position of any item in the Home menu. Press
the Down direction button and select Delete or Move
option and press OK. In order to move a menu item use
the Right and Left direction buttons to select the position
that you want the item to move to and press OK.
2. TV
2.1. Freeview Play
Connects to the Freeview Play platform where you can
access available catch-up TV services (only appears when
the TV is connected to the internet).
2.2. Search
You can search for channels, programmes, services or
settings using this option. Press OK and enter a key word
using the virtual keyboard. Then highlight OK and press
OK to start the search. Results will be displayed on the
screen. Select the desired result using the directional
buttons and press OK to open.
2.3. Guide
You can access the electronic programme guide menu
using this option. Refer to Electronic Programme Guide
section for more information.
2.4. Channels
You can access the Channels menu using this option.
Refer to Using the Channel List section for more
information.
2.5. Timers
You can set timers for future events using the options of
this menu. You can also review the previously created
timers under this menu.
To add a new timer select the Add Timer tab using the
Left/Right buttons and press OK. Set the sub-menu
options as desired and when finished press OK. A new
timer will be created.
To edit a previously created timer, highlight that timer,
select the Edit Selected Timer tab and press OK. Change
the sub-menu options as desired and press OK to save
your settings.
To cancel an already set timer, highlight that timer, select
Delete Selected Timer tab and press OK. A confirmation
message will be displayed. Highlight Yes and press OK to
proceed. The timer will be cancelled.
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
It is not possible to set timers for two or more events that
will broadcasted in different channels at the same time
interval. In this case you will be asked to choose one
of these timers and cancel others. Highlight the timer
you want to cancel and press OK, Options menu will
be displayed. Then highlight Set/Cancel and press OK
to cancel that timer. You will have to save changes after
that. In order to do that press OK, highlight Save Changes
and press OK again.
3. Settings
You can manage the settings of your TV using the options
of this menu. Refer to Settings Menu Contents section
for more information.
4. Apps
When your TV is connected to the Internet related
content will also be available, including Apps related
content. Using the Apps menu you can access and
manage your applications. You can add new apps from
the market or delete the existing ones. Refer to Apps
section for more information.
5. Sources
You can manage your input source references using
the options of this menu. To change the current source
highlight one of the options and press OK.
5.1. Source Settings
Edit the names, enable or disable selected source options.
There are also Regular and Enhanced options available
for HDMI sources. Regular and Enhanced options are
affecting the colour settings of the selected HDMI source.
You can reset your customisations on the Home and
Apps menus to defaults using the Reset Menu option
in the Settings menu (availability depends on TV model
and its features). Highlight this option and press OK. A
confirmation message will be displayed. Highlight Yes
and press OK to proceed. Note that you will not be able
to perform this operation again within the next 2 minutes.
Standby Notifications
If the TV does not receive any input signal (e.g. from
an
aerial or HDMI source)
standby. When you next switch-on, the following
message will be
displayed: "TV switched to stand-by
mode automatically because there was no signal for
a long time."
The Auto Power Down option (in the Settings>System
>More menu) could have been set to a value between 1
and 8 hours by default. If this setting is not set as Off and
the TV has been left on and not been operated during
the set time, it will switch into standby mode after the set
Standard features
for 3
minutes, it will go into
21
Advertisement
Table of Contents
