Juniper Day One+ ACX7100-48L Manual page 2

With 48 SFP and 6 QSFP56-DD ports, the ACX7100-48L routers enable a wide variety of configurations that include
support for 10-Gbps, 25-Gbps, 40-Gbps, 50-Gbps, 100-Gbps, and 400-Gbps speeds.
We ship these routers with redundant power supplies. You can order ACX7100-48L routers with front-to-back airflow
(AIR OUT or AFO) or back-to-front airflow (AIR IN or AFI), and with AC or DC power supplies.
Install the ACX7100-48L
IN THIS SECTION
What's in the Box? | 2
What Else Do I Need? | 2
Install the ACX7100-48L in a Rack | 3
What's in the Box?
ACX7100-48L router with six preinstalled fan modules and two preinstalled AC power supplies
Two AC power cords appropriate for your geographical location
An RJ-45 to DB-9 serial port adapter
A breakout cable to simultaneously connect to a console and to a time of day (TOD) device
A four-post rack mounting kit that contains:
Two mounting rails for mounting the router flush with the front posts of a rack
Twelve flat head Phillips screws for attaching the front mounting rails to the router
Two rear mounting blades
What Else Do I Need?
Someone to help you secure the router to the rack
A number 2 Phillips (+) screwdriver
An electrostatic discharge (ESD) grounding strap
2