Function And Control; Remote Controller Introduction - Gree GEH09AA-K3DNA1D WIFI Service Manual

Service Manual

6. Function and Control

6.1 Remote Controller Introduction

Remote Controller Description
1
2
4
6
8
10
12
14
15
Note:
This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which
the model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running
status.
ON/OFF :
1
Press this button to turn on the unit .Press this button again to turn off the unit.
2
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly decreases
set temperature. In AUTO mode, set temperature is not adjustable.
+
:
3
Press this button to increase set temperat ure.Holding it down above 2 seconds rapidly increases set
temperature. In AUTO mode, set temperature is not adjustable.
4
MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL,DRY,
*
FAN,and HEAT , as the following:
AUTO
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LED of the indoor, and
the unit will automatically select the suitable operation mode in accordance with the room temperature to make indoor room
comfortable.
Technical Information
ON/OFF
1
2
3
MODE
4
Press it to select operation mode
3
(AUTO/COOL/DRY/FAN/HEAT).
FAN
5
Press it to set fan speed.
5
6
7
Press it set swing angle.
9
7
11
8
13
Press it to set HEALTH or AIR function.
16
WiFi
COOL FAN HEAT
DRY
Press it to start or stop operation.
: Press it to decrease temperature
-
setting.
+ : Press it to increase temperature
setting.
SWING
I FEEL
/
*
*Note:Only for models with heating function.
SLEEP
9
TEMP
10
QUIET
11
QUIET function.
Press it to set
CLOCK
12
Press it set clock.
T-ON T-OFF
13
Press it to set auto-off /auto-on timer.
TURBO
14
15 LIGHT
Press it to turn on/off the light.
WiFi
16
13