Aaeon LCD PC User Manual page 49

I n d u s t r i a l P a n e l P C s
The Onyx-158/S comes with a CD, which contains most of drives and utilities of
your needs.
There are several ways of installation depending on the driver package under
different Operating System application.
If you utilize Windows NT series OS, you are strongly recommended to download
the latest version Windows NT Service Pack from Microsoft website and install it
before installing any driver.
Please follow the sequence bellow to install the drivers:
Step 1 – Install VIA 4-in-1 Driver
Step 2 – Install VGA Driver
Step 3 – Install Ethernet Driver
Step 4 – Install Audio Driver
Note: For Touchscreen installation please refers to the excel file:
ReadMe_All-Prods-Touch-list.xls to find out your match touchscreen type and
follow the installation guide in respective folders.
Applicable for Windows 98/2000/XP
1. Insert the supporting CD-ROM into drive.
2. Click on "
installation wizard "
"cd-rom": \Driver\ CPU Board\ PCM-6898\ Step 1 – Install
VIA 4-in-1 Driver"
For Step 2, look for the respective OS folders in the following path:
"cd-rom":\ Driver\ CPU Board\ PCM-6898\ Step 2 – Install
VGA Driver.
wizard "
Again Step 3 & 4, find the installation wizard "
Onyx-158/S Series User Manual V1.2
Start
" button and then click on "
setup.exe
Under the selected OS folder, find the installation
Setup.exe
" button.
O n y x - 1 5 8 / S
Run
" in the following path:
Setup.exe
" button, find the
" button in
49