Table of Contents
Advertisement
1
Safety
1.1
General safety information
1.1.1 Risk of death due to lack of safety
devices
The schematic drawings included in this doc-
ument do not show all safety devices re-
quired for correct installation.
▶ Install the necessary safety devices in the
system.
▶ Observe the applicable national and inter-
national laws, standards and guidelines.
1.1.2 Complying with the safety
information
▶ Observe the safety information in the other
applicable documents.
1.1.3 Using the system assistant
The system assistant does not replace the
instructions that are enclosed with the install-
ation's system components.
▶ Carry out a complete and proper installa-
tion and start-up, as described in detail in
the instructions for the components.
1.1.4 Using the basic system diagrams
▶ The basic system diagrams are examples
of how to set up systems.
▶ Choose the basic system diagram you
want to use to set up your installation.
▶ Enter the number of the selected basic
system diagram into the control's Basic
system diagram configuration function
(→ Installation instructions for the system
control).
1.1.5 Using the wiring diagrams
Each basic system diagram has an associ-
ated wiring diagram that must be used.
▶ Only use the wiring diagram that is appro-
priate for the selected system.
0020243831_00 System assistant
Safety 1
3
Advertisement
Table of Contents
