Table of Contents
Advertisement
12) 3.5" FLOPPY DRIVE (EMBEDDED)
A 3.5"floppy drive is embedded in the operation panel for you to read or store designs. Both 2DD and 2HD disks
can be used.
13) EDITING
You can delete, change, or insert stitch data and function codes (jump, finish, trimming).
14) AUTOMATIC STORAGE OF DESIGN SET-UP
The machine automatically stores "basic set-up"for each design and calls the set-ups when a specific design is
called. This reduces your preparation time.
15) INDIVIDUAL HEAD OPERATION
You can work on the specific head with a broken thread.
16) MACHINE STOPPAGE
The screen will indicate why the machine has stopped.
17) RPM
The screen indicates rpm.
18) FRAME SPEED SET-UP
You can adjust the frame speed to high, medium, or low.
19) UNUSED MEMORY
The screen indicates the memory available for use.
20) TAPE CODE COMPATIBILITY
2-binary and 3-binary tape codes can be edited.
21) CODES FROM OTHER BRANDS
The machine can automatically read designs of various formats stored in the floppy disk. These formats include
SST/ DST, DSB, DSZ/ TAP/ FMC, FDR/ ZSK/ 10O/ EXP.
[ Identifiable Format ]
1. SST
4. FMC, FDR
2. DST, DSB, DSZ
5. ZSK
4-2
3. TAP
6.10O
7. EXP
Advertisement
Table of Contents
