Before Use; Charging - Silvercrest SBL TW10 A1 Operation And Safety Notes

Outdoor bluetooth® speaker/ bocina bluetooth® para exteriores
Table of Contents

Advertisement

Available languages

Available languages

manufacturer or his customer service or by a similarly qualified person in
order to avoid hazards .
SAVE THESE INSTRUCTIONS
˜ Before use
Before use, verify the package contents are complete and undamaged!
 
Place the product on a level, even surface for operation .
 
˜ Charging
The integrated rechargable battery must be charged prior to first use .
 
NOTE: This product may not be charged via the USB port of
notebooks etc .
When the integrated rechargable battery is drained, there will be a
 
notification sound signal every 2 minutes and the LED 2 will blink red .
The integrated rechargable battery should then be charged as soon as
possible .
Depending on the volume and the age of the battery, the operating time
 
of the product is 10 hours of music playback when fully charged .
Open the socket cover 4 then insert the micro-USB plug of the charging
 
cable 12 into the micro-USB charging socket 3 of the product . Insert the
USB plug of the charging cable 12 into the USB port on a USB adapter
(not included in scope of delivery) .
NOTE: The LED 2 will light up red whilst charging and then turn off
once charging is complete . The charging time for a drained battery is 3 hours .
NOTE: The product may be used whilst charging . However, doing so will
at a minimum double the charging time .
Once charging is complete, remove the micro- USB plug of the charging
 
cable 12 from the product .
Close the socket cover 4 of the micro-USB charging socket 3 .
 
14
US-EN

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents