Running - Husqvarna RZ19 Operator's Manual

Running

1. Release the parking brake by moving the lever
downward.
NOTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut off
the engine.
2. Move the steering controls to the neutral position
(N).
3. Select the cutting height by placing the lever
into the desired notch.
WARNING!
Ensure that no one is near mower
when engaging blade control lever.
4. Move throttle control to full throttle.
5. Engage the mower blade by sliding the lever
upwards and into the lock notch.
The machine's speed and direction are continuously
variable using the two steering controls. When both
controls are in the neutral position, the machine
stands still.
By moving both controls an equal amount forward
or backward, the machine moves in a straight line
forward or backward respectively.
In order, for example, to turn right while moving
forward, move the right control towards the neutral
position. The rotation of the right wheel is reduced
and the machine turns to the right.
Turning on the spot (zero turn) can be achieved by
moving one control backward (behind the neutral
position) and carefully moving the other steering
control forward from its neutral position.
28
-Husqvarna
oPeRAtIon
Parking brake not activated
Mower deck's lifting lever
Mower blade control lever locked into blade engagement
8050-005
8058-085
8058-075