Running - Husqvarna EZ4624 Operator's Manual

Running

1. Release the parking brake by moving the
lever downward.
Your mower is equipped with an operator
presence system. When the engine is
running, any attempt by the operator to leave
the seat without first setting the parking brake
will shut off the engine.
2. Move the steering controls to the neutral
position (N).
3. Select the cutting height by adjusting the
cutting height pin. Release latch and lower
deck to set cutting height.
IMPORTANT INFORMATION
The mower deck's anti-scalp rollers should
be evenly adjusted.
WARNING!
Ensure that no one is near
mower when engaging blade
switch.
4. Make sure the work area is free from objects
that could be thrown by the rotating blades.
5. Engage the mower deck by pulling out the
blade switch.
6. Move throttle control to full throttle (not
choke)
7. The machine's speed and direction are
continuously variable using the two steering
controls. When both controls are in the
neutral position, the machine stands still.
By moving both controls an equal amount
forward or backward, the machine moves in
32
-
English
OPERATION
Released parking brake
Cut height selection
Engaging the mower deck
8011-711
8011-669