Installing The High Feature 3Rw5 Hmi On A Flat Surface - Siemens SIRIUS 3RW55 Equipment Manual

Mounting and dismantling
4.4 Installing, mounting and removing the 3RW5 HMI High Feature
Procedure
NOTICE
Damage caused by electrostatic charge
Note the information in chapter ESD Guidelines (Page 13).
Illustration similar
• Observe the coding of the plug and socket
• Lock the connector in the socket
• Observe the cable routing:
–
–
Result
You have installed the 3RW5 HMI High Feature in the 3RW55 or 3RW55 Failsafe soft starter and
can commission (Page 127) it.
4.4.3

Installing the High Feature 3RW5 HMI on a flat surface

Requirements
• Note the mounting positions, minimum clearances and ambient conditions stated on the
data sheet.
• Removed 3RW5 HMI High Feature (Page 60)
• Level surface, e.g. sufficiently strong mounting plate
62
①
Cable routing to the right
③
Cable routing to the left
① ③
/ .
②
.
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006