Table of Contents
Advertisement
8.20
Monitoring
8.20.1
Monitoring the measured values of the 3RW55 soft starter with the 3RW5 HMI
High Feature
Operating principle
The measured values are provided by the respective device functions. All measured values are
stored in the measured value memory, which is volatile. These values can be read out and
evaluated by the 3RW5 HMI High Feature. You can specify up to 5 measured values, which are
shown on the operation display (Page 121).
Display on the 3RW5 HMI High Feature
• Menu: "Monitoring > Measured values"
Further display options of the measured values
• With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the 3RW5 HMI High Feature
Brief overview: Window "Project Navigation" with current project under created Soft Starter >
"Commissioning" > Window "Work area" > "Soft Starter > Measured values"
• With a fieldbus via a 3RW5 communication module:
– With SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (only via a 3RW5 PROFINET
– Configuration software of the control system (e.g. STEP 7 with corresponding HSP)
– User program
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006
or PROFIBUS communication module)
Brief overview: See SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
Functions
8.20 Monitoring
227
Advertisement
Chapters
Table of Contents
