iCoolsport 2 Series Owner's Manual page 33

Screen Freeze
This is a very rare issue. If the screen freezes while the iCool
is running normally, the main computer will usually still carry
on running the system and monitoring the safety features
but you will not be able to change anything and the displayed
temperatures will not update. You can either allow it to keep
running if that is more convenient, or you can restore the
system to normal operation by switching off the main power
and re starting again.
Screen Not Connecting
Make sure that the data cable is correctly plugged to the
screen and to the Electronic Panel Box on the MiPod. You can
also try turning the unit OFF and ON again and waiting for 30
seconds. The connection should be automatic.
Software Not Loading
If the software doesn't load for any reason, we recommend
turning the unit OFF and ON first to see if that solves the issue.
If the issue persists, please contact iCool Support.
Condensation
Please note that your unit is a very powerful chiller and
condensation will occur inside of it. Water may be visible
inside the MiPod in the built-in area, this is completely
normal. If necessary, you can place a dripping tray under the
unit to catch the overflow water.
Safety Switch Tripping
If your unit is tripping the safety switch, please make sure you
are plugging the chiller to the same voltage noted on the side
of the chiller.
If that is correct, please check at what stage of the Progress
Bar the unit trips and contact iCool Support.
33