iCoolsport 2 Series Owner's Manual page 23

TIMER
Your MiPod screen has a built in SESSION TIMER. Touch the
blue MENU button to reveal all available options on your
machine & choose TIMER from the list.
This timer does not affect the operation of the chiller and will
not switch it on or off.
This timer only allows you to set an alarm for the amount of
time you want to remain in the pool. It provides a count down
on the screen and sounds a warning sound at the end of the
session. It can automatically re-set and start again for the next
session.
CURRENT POOL CURRENT POOL
EDIT
Click the Edit symbol to change timer settings.
- +
Simply click or repeatedly to set the Countdown Time
and do the same to set a Change Over Time in between
sessions then click SAVE.
RESTART
LOCK
You can also lock your screen by entering a 4-digit passcode.
This will limit the access to the settings of the chiller.
To set a passcode, go to MENU > LOCK > Set a PIN and enter a
combination of 4 numbers.
You can remove this settings by selecting " Remove PIN".
Your device can be locked with a PIN
to prevent unauthorised use.
Set a PIN
Remove PIN
INFO
All information about your machine is available in Menu > Info.
> The Device ID (or Serial Number), also noted on the label
attached at the back of your unit. This ID number will need to be
given to us in the event of warranty queries and repairs.
> The Model (or Product Name).
> The Software Version of your device.
> The IP Adress of your device.
23