iCoolsport 2 Series Owner's Manual page 16

Fill with water
Fill pool with water and allow enough space to handle water displacement and prevent overflow when
users enter the pool. This is particularly important if you intend to have 2 or 3 people at the same time.
Make sure the bath is filled with enough water as recommended on the right.
Fill with a hose
A permanent water connection is not
required. Simply fill with a hose over
the Mipod to at least cover the internal
top water outlet. If this is not followed,
the machine will draw air and cause the
safety system to shut the system down.
12mm hose
To empty water from MiPod, simply
(not supplied)
connect a 12mm hose to the drain valve
and OPEN valve to let water go.
Drain Valve
Make sure the drain valve is in the
CLOSED OPEN
CLOSED position when filling the bath
so the water stays inside the MiPod.
16