FRAME IT ALL Center Circle 16' x 16' Assembly Instructions page 3

Step 6: Before stacking your boards, lay them out around your 1
NOTE: Stacking stakes will be used for all additional levels and can insert into
the top of existing stakes.
7
1
4
1
3
1
1
5
1
1
2
7
Step 7. Start your 2
Have the bracket for the gate board (7) on the bottom of the
joint as shown in the picture to the left. Then continue from
this point stacking the remaining 2
Skip to step 1 of the Animal Barrier assembly if you are
assembling a 2-level bed design.
Step 8: Repeat steps 5, 6, & 7 for each additional level of your design.
st
level frame.
7
2
1
1
5
1
1
3
1
1
4
7
nd
level by connecting the 2/5/7 joint first.
nd
level boards.
ASSEMBLY INSTRUCTIONS – Animal Barrier Gate
Step 1: Install an adapter cap (Part 21) on top of each of the 10 joints on your final level.
Quantities doubled for 2 level Barrier
NOTE: Part 12 will not be used
if installing the gate to Board
connector