Running In, Ignition Switch - Renault TRIBER 2021 Vehicle User Manual

RUNNING IN, IGNITION SWITCH

Running in
For the first 1,000 km, do not exceed
80 km/h in the highest gear.
You may only expect top performance
from your vehicle after approximately
3,000 kms.
Oil change frequency: Please refer to
your vehicle's maintenance schedule.
NOTE : During the running in period, do
not accelerate hard while the engine is
still cold and do not let the engine to run
in higher rpm.
Service intervals: refer to the
Maintenance Schedule for your vehicle.
2.2
ENG_NU_1321-2_XBC_Renault_2
Jaune Noir Noir texte
Stop and steering lock
position St
To lock: remove the key and turn the
steering wheel until the steering column
locks.
To unlock: turn the key and the steering
wheel slightly.
Accessories position A
When the ignition is switched off, any
accessories (radio, etc.) will continue to
function.
Rodage / Contacteur de démarrage (XBC - Renault)
Ignition on position M
The ignition is switched on:
– the engine may be started.
Start position D
If the engine fails to start at the first at-
tempt, turn the key back to home posi-
tion before activating the starter again.
Release the key as soon as the engine
starts.
NOTE:
– Do not attempt to start/crank the
engine in running/geared condi-
tion;
– Do not attempt to crank the engine
more than 5 times repeatedly, if
the vehicle doesnot starts. Wait
for sometime and crank the
engine. If the vehicle didnt starts,
contact the nearby authorised
dealer;
ENG_UD68122_2