Fitting Pipe Base; Discharge Pipe - Yoshitake AL-27 Product Manual

7.1 Fitting pipe base (See Figure 5.)
(1) Fitting pipe base should have enough strength and rigidity against the stress induced by reaction
force in the opposite direction of the exhaust through the axis of the exhaust pipe.
(2) Equip the discharge pipe with a support to avoid excessive load, deflection, or vibration.
(3) Install the product at a place where its maintenance and inspection can be performed.
7.2 Discharge pipe (See Figure 5.)
Diameter of the discharge pipe should be the same or larger than that of the outlet of the product.
Flexible joint
Check valve
Pump
Figure 5. Piping example
Secure at least
500mm for
maintenance
Fitting pipe
base
Discharge
Fluid inlet
Support
Water tank
8
Select a pipe with the same
or larger diameter than the
outlet diameter of the valve

Discharge pipe

Pillar
Support
Foot valve
■EPDT-351■