Recording An Activity With Connected Gps; Recording A Strength Training Activity - Garmin VIVOSMART 5 Owner's Manual

7 After you complete your activity, hold
8 Select an option:
• Select to save the activity.
• Select to delete the activity.
• Select to resume the activity.

Recording an Activity with Connected GPS

You can connect the watch to your phone to record GPS data for your walk, run, or bike activity.
1 Press to view the menu.
2 Select .
3 Select , , or .
4 Open the Garmin Connect app.
NOTE: If you cannot connect the watch to your phone, you can select
will not be recorded.
5 Select to start the activity timer.
6 Start your activity.
Your phone must be in range during the activity.
7 After you complete your activity, hold
8 Select an option:
• Select to save the activity.
• Select to delete the activity.
• Select to resume the activity.

Recording a Strength Training Activity

You can record sets during a strength training activity. A set is multiple repetitions (reps) of a single move.
1 Press to view the menu.
2 Select > .
3 Select to set up rep counting and automatic set detection.
4 Select the toggle switch to enable Rep Counting and Auto Set.
5 Press to return to the activity timer screen.
6 Select to start the activity timer.
7 Start your first set.
The watch counts your reps.
8 Swipe to view additional data screens (optional).
9 Press to finish a set.
NOTE: If necessary, select
10 Select to start the rest timer.
A rest timer appears.
11 Press to begin the next set.
12 Repeat steps 9 through 11 until your activity is complete.
13 After you complete your activity, hold
14 Select an option:
• Select to save the activity.
• Select to delete the activity.
• Select to resume the activity.
12
until appears and the circle closes.
until appears and the circle closes.
to edit your rep count.
until appears and the circle closes.
to continue the activity. GPS data
Training