Product Manual Thrii-Tap+ D Hand Wash
Dryer
5. Overview
The Wallgate Thrii-Tap+ is an integrated hand wash dryer unit with automatic infra-
red sensor operation.
There are two model options that are otherwise identical except for the Tap head
mounting method. It is available as a wall mounted configuration to be installed with
the Control Module installed in a service duct on the other side of a wall, and as a
deck mounted version to be installed with the Control Module mounted below a basin
or vanity top.
These instructions deal with the deck mounted version.
When hands are placed under the centre of the tap head, an infra-red sensor
activates the hand washing and drying cycle, supplying soap (liquid or foam), warm
water and dryer-air in amounts and intervals preset as required.
The unit can be installed in a variety of wall types, (depending on configuration) and
most servicing can be carried out without removing the control module or tap head
from its installed position. Note, the appliance is designed to be used in commercial
areas.
Figure 1: Deck mounted tap dimensions.
Revision 2
9