Programmed Settings - Wallgate Thrii-Tap+ Product Manual

Product Manual Thrii-Tap+ D Hand Wash
Dryer

8. Programmed Settings

The Wallgate Thrii Tap+ operational program is supplied factory set but can be
adjusted to suit the end-user requirements.
Any service or repair work must be done by a qualified engineer. During the warranty
period, the service or repair must only be done by a Wallgate engineer or appointed
service agent. Refer to the Wallgate terms and conditions for warranty information.
The display cover must be removed to allow settings to be changed. This can be
done by removing the two M3 thumb screws from the cover eitherby hand or with a
flat head screwdriver (Fig 18). The panel must be replaced when the in use to
prevent ingress of water into the module.
Figure 18: Display cover removal.
Revision 2
27