How To Operate Your Ceiling Fan - Westinghouse Mountain Gale Owner's Manual

HOW TO OPERATE YOUR CEILING FAN

‫כיצד להפעיל את מאוורר התקרה שלך‬
Restore electrical power to the outlet box by turning on the electricity at the main fuse box.
To make the fan operational, open battery door by pressing and sliding down the battery door.
Install two AAA 1.5V batteries (not included) into the hand-held remote transmitter(if not used for long
periods of time, remove the batteries to prevent damage to the transmitter).
1. This unit finished learning process inside manufactory, if replace transmitter or receiver, user need to
redo learning process before using this unit.
2. After installing the unit and power on, open battery cover (with batteries, DC1.5V/AAA 2pcs, installed) and press
and hold fan off key 1~3seconds, FAN will be running medium speed, which indicate that learning process
finished. Learning effect distance is same with remote' s . Please note that must press the fan off key within 30
seconds after power on. If just replace batteries, no need to re-learn.
3. Please note that the transmitter can pair with multiple receivers. When the transmitter does not control
the receiver, please check if any similar remote controls are working nearby, disconnect them and then
proceed with pairing process again.
4. Store the remote transmitter away from excessive heat or humidity.
5. Battery of low power or not-used for long time should be replaced.
18
Saynet-EI-Mountain Gale (RC)-WH21