Instruction Manual for Table-top Mini Dough Moulder T300 1.4 Intellectual Property Rights This manual contains copyright information. All rights are reserved. No part of this manual can be reproduced or photocopied without prior written permission of International Bakery Equipment Pty Ltd. Permission to use this documentation has only been given to the customer who this manual has been supplied as part of the machine’s equipment and only for...
Instruction Manual for Table-top Mini Dough Moulder T300 1.5 Warranty Terms and Conditions • Warranty becomes effective from date of delivery. • Warranty claims may be made by telephone, letter, email or fax. However, all verbal claims must be confirmed in writing. I.B.E. Pty Ltd Reserves the right to require return of all claimed defective parts.
Instruction Manual for Table-top Mini Dough Moulder T300 1.7 Machine Identification Details Type: Table-Top Mini Dough Moulder Model: T300 Position of Serial Number Identification Plate (Fig 1.1) Serial number Identification plate Fig 1.1 Note: When requesting spare parts please state the serial number found on the serial number identification plate.
Instruction Manual for Table-top Mini Dough Moulder T300 1.8 Main Machine Components In Feed Chute Emergency stop Bar Forming Emergency Chain stop button Pressure plate Adjustment wheel Roller Adjustment wheel ON / Off Buttons Out Feed Table Fig1.2 Main Machine Components...
Page 9
Instruction Manual for Table-top Mini Dough Moulder T300 1.9 Safeguards This machine has been fitted with safeguards to ensure safe operation of this machine, in accordance please ensure the following; • Do not place foreign objects on or under the belts.
Instruction Manual for Table-top Mini Dough Moulder T300 2. Transport and Installation: 2.1 Transport The instructions given in this section must be carefully followed when transporting the machine. This operation may include but is not limited to the following: • Storage of the machine •...
Instruction Manual for Table-top Mini Dough Moulder T300 2.2 Installation • Ensure transport crate and all protective packaging is removed. • Carefully clean the machine using a damp clean cloth, removing dust on all surfaces. • When the machine has been unpacked, check the condition of the machine. Any visible damage indicates that the machine has been dropped or hit by something during transport.
Instruction Manual for Table-top Mini Dough Moulder T300 3. Machine Operation: 3.1 Intended Operation This machine has been designed and manufactured for the final moulding of dough pieces for bread baguettes’, French sticks, and long rolls with the use of two sets of stainless steel rollers...
Instruction Manual for Table-top Mini Dough Moulder T300 3.2 Control Components Fig 3.1 T300 Control Components www.allaboutbakery.com.au...
Page 14
Instruction Manual for Table-top Mini Dough Moulder T300 Location Description Operation Performed On / Off When the green switch is pressed the power is turned on. Switch When the red switch is pressed the power is turned off. Pressure roller...
Page 15
Instruction Manual for Table-top Mini Dough Moulder T300 3.3 Moulder Operation These operating procedures are to be used as a guide, as every bakeries dough consistency is different. These steps should be used to set up the T-300 to your specific product and by keeping...
Instruction Manual for Table-top Mini Dough Moulder T300 4. Cleaning &Maintanance: 4.1 Cleaning • Always turn power off at the wall and unplug machine prior to cleaning or maintenance. • This machine should be cleaned at the end of every day, to prevent a build up of dough crumb and flour dust.
Page 17
Instruction Manual for Table-top Mini Dough Moulder T300 4.2 Maintenance It is recommended that this machine should be serviced once every 12 months by a qualified technician to maintain hassle free operation. If in the event the machine does not operate correctly it is recommended that you contact your supplier to ensure a qualified technician services the machine for you.
Page 18
Instruction Manual for Table-top Mini Dough Moulder T300 4.3 Spare Parts List Description Description Gear 15T Bearing Housing Gear 12T Bearing Housing Chain Adjuster Shaft Emergency Stop Gear Conveyor Pressure Plate Adjusting wheel Turn over plate Forming Chain Bearing Switch...
Page 19
Instruction Manual for Table-top Mini Dough Moulder T300 4.4 Exploded Parts Drawing www.allaboutbakery.com.au...
Page 20
Instruction Manual for Table-top Mini Dough Moulder T300 www.allaboutbakery.com.au...
Page 21
Instruction Manual for Table-top Mini Dough Moulder T300 www.allaboutbakery.com.au...
Page 22
Instruction Manual for Table-top Mini Dough Moulder T300 4.5 Electrical Wiring Diagram www.allaboutbakery.com.au...
Need help?
Do you have a question about the T300 and is the answer not in the manual?
Questions and answers