EdilKamin PELLKAMIN 8 EVO Manual page 21

BE CAREFUL REMOVE THE PART AS SHOWED BELOW
EXTRACTION OF THE INSERT , COLD, WITHOUT
OPTIONAL
CAUTION:
BEFORE PROCEEDING, MAKE SURE THAT THE
INSERT IS FIXED TO THE BASE.
To extract the insert, proceed as follows:
• Open the door and lift the slide lock (F).
• Attach the handle provided to the two pins fixed to the
lower grille (G) and pull the insert towards you as
far as it will go
Each time the insert is removed, a security system
cuts off the power supply. Should the insert be removed
involuntarily during ignition, operation or while switching
off (including while blocked), the "Power failure" block
phase will be launched when the insert is reinserted.
Wait for the block phase to end before reactivating the
insert.
USER INSTRUCTIONS
USER / INSTALLER
F
G
Rack and frame are optional
IT IS IMPORTANT FOR
SAFETY REASONS THAT
THE PRODUCT IS FIXED
AT THE FLOOR
21