Adjusting The Hopper Lid; Loading The Hoppers - Horizon Fitness DSX 40 Operator's Manual

6.3.4 - Adjusting the hopper lid

The Hopper lid is adjustable and MUST be checked regularly to ensure there is no air escaping
when the fan is operating.
DANGER: Operators are working at height when accessing the hopper, slips
and falls can result in serious injuries. Operators should use the supplied hand
rails when accessing the top of the hopper, never standing or walking on top of
a closed lid
WARNING: Never walk on the closed lid. Only move forward and rearward on
the hands and knees, directly down the middle of the lid.
WARNING: The lid MUST be free of moisture before attempting to complete
any lid adjustments, due to the risk of slipping.
1. Close and lock the lid (1).
2. Loosen the M8 lock nut
(2) on the all the M8
adjusting bolts (A) and
(B)
3. Rotate each adjusting
bolt ½ a turn until
properly adjusted.
4. Tighten the lock nuts.

6.3.5 - Loading the hoppers

DANGER: Operators are working at height when accessing the hopper, slips
and falls can result in serious injuries. Operators should use the supplied hand
rails when accessing the top of the hopper, never standing or walking on top of
a closed lid
DANGER: Do not stand under big bags. Operators should also not stand on top
of the tank whilst the big bag is lifted into position
WARNING: Wear manufacturers recommended PPE when working with
dressed seed.
| 39