6.5.1 - Metering Overview
1. Drive Motor
2. Front and Rear Bearing Housings
3. Vent Chamber
4. Rubber Scraper
5. Metering Rollers
6.5.2 - Rubber Scraper
The rubber scraper in the metering unit has 2 positions depending upon the type of seed being
used. One position is for smaller seed and granular products, whilst the other is for larger seeds.
The position of the clamping plate determines which format the scraper is in.
IMPORTANT: The scraper is a wearing item and must be regularly checks and
periodically replaced. Best practice is to inspect prior to the start of each drilling
season.
IMPORTANT:Incorrect fitment or adjustment of the rubber scraper can cause high
motor loading (Producing error codes or incorrect seeding rates)
46
|
6. Small Seed Metering Rollers
7. Guillotine
8. Plunger
9. Bearing
10. Meter Housing