Storage - Horizon Fitness DSX 40 Operator's Manual

9.2 - Storage

If the machine is to be stored for a prolonged period – Such as between sowing seasons, follow the
instructions listed below
1. Hoppers should be emptied of any product (See section 6.3.5)
2. Machine should be cleaned and lubricated as per section 9.1 following all steps
3. If using a corrosion prevention agent on the machine, ensure any spray coating used is
biodegradable
4. Hydraulic piston rods on the cylinders should be protected against corrosion
5. Park the machine as per section 6.1.3 ideally under a roof
6. Pneumatic systems should be relieved of any stored pressure, and compressed air tanks
must be drained in preparation for storage to prevent corrosion or a risk of freezing (Optional
compressor and airbrake tanks)
IMPORTANT: DO NOT apply corrosion protection agents or oils to any plastic
or rubber components on the drill. These components can be affected by these
products becoming brittle or breaking
66 |