Table of Contents
Advertisement
7.2 - In Tank Cameras
In tank cameras are fitted to monitor the fill status of the hoppers and check for product bridging.
These cameras can be accessed via the supplied tablet control screen.
IMPORTANT: Whilst product is flowing via the metering system and the hoppers are
emptying it is still highly recommended that the operator checks the seed placement
regularly.
7.3 - Reversing Camera
Reversing cameras are fitted to assist the operator in the manoeuvering of the implement. These
cameras can be accessed via the supplied tablet control screen.
DANGER: All personnel shoulld be kept clear of the vehicle and implement whilst
manoeuvering
DANGER: Reversing cameras should not be used to exclusively manoeuvre
the implement and tractor. Failure by the operator to observe the surroundings
appropriately or local applicable traffic regulations can result in serious injuries and
possible fatalities
7.4 - Compressor
The DSX can be equipped with a compressor to supply air to the pneumatically actuated closing
system and trash wheels if fitted. The system is equipped with an automatic cut off pressure
regulator, to control the pressure in the storage tank, this requires no maintenance or adjustment.
The compressor itself is an oilless maintenance free compressor, fitted with an auto draining water
trap. It is recommended the operator check the water trap regularly to ensure it is still correctly
functioning. The system is powered by an Anderson connector shown in section 5.4, The system
is connected to the pneumatic control systems by a 6mm Pneumatic hose directly from the
compressor.
DANGER: Operators should NEVER drill, weld, or modify the storage tank in anyway.
Failure to do so can modify the structural integrity of the pressure vessel and can
consequently cause serious injuries
IMPORTANT: It is recommended operators drain the compressor air reservoir. A
reminder sticker is fitted to the tank itself to indicate the drainage location
60
|
Advertisement
Table of Contents
