Trouble Messages - Hitachi DZ-MV100A Instruction Manual

Trouble Messages

Message
COPY ERROR The video signal input to
this DVD camcorder may be
copy-guarded.
CHECK DISC Disc that cannot be used on
this DVD camcorder has
been inserted or DVD-RAM
disc is write protected.
INITIALIZE DVD-RAM disc is not
DISC initialized or it is damaged.
END OF DISC DVD-RAM disc is full.
DISC ALMOST DVD-RAM disc will soon be
FULL full, and recording will be
impossible.
Probable Cause Troubleshooting
Some prerecorded video materials,
such as movies, are guarded
against copying.
Copy-guarded materials cannot be
recorded on this DVD camcorder.
Check whether the type of disc is
correct or not, or whether the DVD-
RAM disc is write protected or not.
If this message appears, be sure to
initialize the disc on this DVD
camcorder before using it.
Reinitializing even a DVD-RAM disc
used on this DVD camcorder may
be necessary (initializing will erase all
recorded contents on disc). If this
message appears, try to initialize the
disc. If the same message still
appears, the DVD-RAM disc may be
damaged: Use another DVD-RAM
disc.
You cannot record on this disc
anymore. Prepare another disc or
delete unnecessary movie scenes
from this disc.
Replace the disc.

Trouble Messages

151