Table of Contents
Advertisement
chapter 2_Setups
4. Insert the DVD-RAM disc cartridge into
the disc guide, so that the side of disc
you want to record faces the hand strap
(see p.37), with the disc shutter towards
the video lens.
The cartridge will stop once midway: Firmly push
it in until it stops.
Caution:
• The DVD-RAM disc has an orientation: If it is forcibly inserted from the wrong direction, the DVD
camcorder or cartridge could be damaged.
5. Gently push the section indicated
"PUSH" on the cover of disc insertion
block (hand strap), to close the cover.
Caution:
• The cover cannot be closed unless the disc is correctly inserted.
If the cover does not close, remove the disc and reinsert it.
6. Push down the POWER switch to turn
the DVD camcorder on.
When the DVD camcorder is turned on, an image
will appear in the viewfinder and disc recognition
will start. After approximately 25 seconds, the DVD
camcorder will enter the recording pause status.
Make sure of the remaining space on disc, refer-
ring to indicators "remaining recordable time/num-
ber of recordable stills" described in "Information
Display during Recording", p. 62.
Cautions:
It will take more time than usual after the disc is inserted before recording can begin in the following
cases:
• When the cover of disc insertion block is open
• When the date changes (first recording of a day)
• When the temperature changes at least 50 F (10 C) from the previous recording status
• When a disc with scratches, dirt or fingerprints is inserted
48
Disc guide
Hand
strap
Shutter
(In case of movie)
Advertisement
Table of Contents
