Table of Contents
Advertisement
Reducing Wind Noise Picked Up by Microphone
When recording sound using the built-in microphone, you can reduce wind noise by
filtering it. Since the low-frequency components of sound input to the microphone
during recording are cut, the object sound will be easy to hear.
1. Press the MENU button in the recording pause status to display the
menu screen.
2. Choose "REC SETUP" and then "MIC
FILTER".
Options will be next to "MIC FILTER": "OFF" is
being highlighted.
3. Turn the Select dial to change the option
to "ON", and then press the Select dial.
The menu screen for setting record mode will be
restored, and "MIC FILTER ON" has been speci-
fied.
4. Press the MENU button to switch off the menu screen.
Checking microphone filter setting
You can check the on setting of microphone filter by
reviewing on-screen information: MIC will appear for
ON setting, and no indication will appear for OFF set-
ting.
The microphone filter setting will be held in memory
until it is changed even after the DVD camcorder is
turned off.
Useful Functions during Recording of Movie
Microphone filter indicator
81
Advertisement
Table of Contents
